Refrigeration Evaporators, Condensers & Accessories: Ammonia
|
| AMMONIA EVAPORATOR |
| Stock No. : | 10-944-DF | | Title : | AMMONIA EVAPORATOR | | Description : | AMMONIA EVAPORATOR, MFG. BY VILTER, MODEL BFS56832RAHGP, ESTIMATED CAPACITY 10 TONS, 32 HP, 3 AXIAL FANS. | | Manufacturer : | VILTER | | Model : | BFS56832RAHGP | | Size : | 10 TON CAPACITY | | Horse Power : | 32 HP |
|
 |
|
|
| AMMONIA EVAPORATOR |
| Stock No. : | 10-861-DB | | Title : | AMMONIA EVAPORATOR | | Description : | AMMONIA EVAPORATOR, MFG. BY KRACK, MODEL APH-2510-3-RBA-HGU, APPROX. 14 TON CAPACITY, LIQUID RECIRCULATION WITH HOT GAS DEFROST COIL AND PAN, 4 FINS/INCH, (2) 5 hp MOTORS, 230 VOLTS, 3 PHASE, 1750 RPM, AXIAL FANS, DRAW THROUGH STYLE, OVERALL SIZE 120 " LONG X 60 " WIDE X 48 " HIGH, S/N 210163-3. | | Manufacturer : | KRACK | | Model : | APH-2510-3-4BA-HGU | | Size : | 14 TON | | Horse Power : | 5 | | RPM : | 1750 |
|
 |
|
|
| AMMONIA EVAPORATOR |
| Stock No. : | 10-925-DF | | Title : | AMMONIA EVAPORATOR | | Description : | AMMONIA EVAPORATOR, MFG. BY VILTER, MODEL LP-20-84-1/3-RA-HGC, 8 TON CAPACITY, 4 AXIAL FANS, 1/3 HP MOTORS, 230/460 VOLT, 3 PHASE, LIQUID RECIRCULATION, HOT GAS COIL, 4 FINS PER INCH, OVERALL DIMENSIONS: 138 " LONG X 40 " WIDE X 30 " HIGH. | | Manufacturer : | VILTER | | Model : | LP-20-84-1/3-RA-HGC | | Size : | 8 TON | | Horse Power : | 1/3 |
|
 |
|
|
| AMMONIA EVAPORATOR |
| Stock No. : | 10-865-DB | | Title : | AMMONIA EVAPORATOR | | Description : | AMMONIA EVAPORATOR, MFG. BY KRACK, MODEL DTX55-1270-RBA, APPROX. 7.5 TON CAPACITY, 5 AXIAL FANS, 1/3 HP. | | Manufacturer : | KRACK | | Model : | DTX55-1270-RBA | | Size : | 7.5 TONS | | Horse Power : | 1/3 |
|
 |
|
|
| AMMONIA EVAPORATORS |
| Stock No. : | 10-868-DB | | Title : | AMMONIA EVAPORATORS | | Description : | AMMONIA EVAPORATOR, MFG. BY KRACK, MODEL DTX55-1270-RBA, APPROX. 7.5 TON CAPACITY, 5 AXIAL FANS, 1/3 HP. | | Manufacturer : | KRACK | | Model : | DTX55-1270-RBA | | Size : | 7.5 TONS | | Horse Power : | 1/3 |
|
 |
|
|
| AMMONIA EVAPORATIVE CONDENSOR |
| Stock No. : | 10-960-MU | | Title : | AMMONIA EVAPORATIVE CONDENSOR | | Description : | AMMONIA EVAPORATIVE CONDENSOR, MFG. BY EVAPCO, MODEL PMCA-850, S/N 939435, ESTIMATED 600 TONS FOR AMMONIA, (4) FANS POWERED BY (2) 15 HP MOTORS, DIMENSIONS: 12 ' WIDE X 36 '8 " LONG X 14 ' HIGH. (SHIPPED DISASSEMBLED IN 3 PIECES.) | | Manufacturer : | EVAPCO | | Model : | PMCA-850 | | Size : | 600 TONS | | Horse Power : | 15 HP |
|
|
|
|
| AMMONIA EVAPORATIVE CONDENSOR |
| Stock No. : | 10-716-SN | | Title : | AMMONIA EVAPORATIVE CONDENSOR | | Description : | AMMONIA EVAPORATIVE CONDENSOR, MFG BY EVAPCO, MODEL PMC-295N, 180 ESTIMATED TONS FOR AMMONIA, COIL & FAN SECTIONS DISASSEMBLED FOR TRANSPORT, COIL IS 4 ' 6 " HIGH, FAN IS 8 ' 6 " HIGH, OVERALL DIMENSIONS APPROX. 10 ' WIDE X 12 ' LONG X 13 ' HIGH, S/N 868472. | | Manufacturer : | EVAPCO | | Model : | PMC-295N | | Size : | 180 TONS |
|
 |
|
|
| AMMONIA EVAPORATIVE CONDENSOR |
| Stock No. : | 10-936-ZC | | Title : | AMMONIA EVAPORATIVE CONDENSOR | | Description : | AMMONIA EVAPORATIVE CONDENSOR, MFG. BY VILTER, MODEL VLH100, 73 ESTIMATED TONS FOR AMMONIA, (2) CENTRIFUGAL FANS ON COMMON SHAFT, 7 1/2 HP MOTOR, 4 " GAS INLET & LIQUID OUTLETS, 4 " REFRIGERANT PORTS, OVERALL SIZE 10 ' LONG X 6 '6 " WIDE X 8 ' HIGH, S/N F28285. | | Manufacturer : | VILTER | | Model : | VLH 100 | | Size : | 73 TON |
|
 |
|
|
| AIR COIL COOLING TOWER |
| Stock No. : | 10-947-DC | | Title : | AIR COIL COOLING TOWER | | Description : | BALTIMORE AIR COIL COOLING TOWER MODEL VT010ZL, S/N 93600835P, 100 ESTIMATED TONS FOR WATER COOLING APPLICATIONS, 4 SQUIRREL CAGE TYPE FANS, 12 ' LONG X 4 ' WIDE X 9 ' 6 " HIGH. | | Manufacturer : | BALTIMORE | | Model : | VT0102L | | Size : | 12' LONG X 4' WIDE X 9'6" HIGH |
|
 |
|
|
| AMMONIA RECEIVER |
| Stock No. : | 10-782-RB | | Title : | AMMONIA RECEIVER | | Description : | AMMONIA RECEIVER, VERTICAL DESIGN, MFG BY E.L. NICKEL, 48 " DIAMETER X 18 ' HIGH, MAXIMUM PRESSURE, 6,400 LB CAPACITY, NB# 1558, S/N 88224. | | Manufacturer : | E.L. NICKEL | | Size : | 6400 LB. |
|
|
|
|
| AMMONIA RECEIVER |
| Stock No. : | 10-781-RB | | Title : | AMMONIA RECEIVER | | Description : | AMMONIA RECEIVER, VERTICAL DESIGN, MFG BY E.L. NICKEL, 48 " DIAMETER X 12 ' HIGH, 250 PSI, MAXIMUM PRESSURE, 4,100 LB, NB#27366, S/N 29401. | | Manufacturer : | E.L. NICKEL | | Size : | 4100 LB. |
|
 |
|
|
| AMMONIA RECEIVER |
| Stock No. : | 10-883-RO | | Title : | AMMONIA RECEIVER | | Description : | AMMONIA RECEIVER, VERTICAL DESIGN, MFG BY RVS, NB# 11834, S/N 981085, BUILT 1999, 36 " DIAMETER X 9 ½ ' HIGH, 2 " INLET, 2 " OUTLET, (4) ¾ " SIGHT GLASS FITTINGS, ½ " SAFETY AND OIL DRAIN, 1800 LB. CAPACITY, 250 PSI, MAXIMUM PRESSURE. | | Manufacturer : | RVS | | Size : | 1800 LB. |
|
|
|
|
| AMMONIA RECEIVER |
| Stock No. : | 10-459-MM | | Title : | AMMONIA RECEIVER | | Description : | AMMONIA VERTICAL RECEIVER, MFG BY WHEELER TANK, 250 PSI, 36 " DIAMETER X 8 ' HIGH, 3 " FLANGED INLET, 1 ¼ " NPT OUTLET, GAUGE GLASS FITTINGS, APPROXIMATE 1800 LB. CAPACITY. | | Manufacturer : | WHEELER TANK | | Size : | 1800 LB. |
|
|
|
|
| AMMONIA RECEIVER |
| Stock No. : | 10-971-GR | | Title : | AMMONIA RECEIVER | | Description : | AMMONIA RECEIVER, HORIZONTAL DESIGN, MFG BY E.L. NICKEL, 30” DIAMETER X 14’ LONG, 250 PSI, MAXIMUM PRESSURE, NB#47378, APPROXIMATELY 1,947 LB. CAPACITY. | | Manufacturer : | E.L. NICKEL | | Size : | 30\" DIA X 14\' LONG |
|
Contact us for
image or more information |
|
|
| AMMONIA SUCTION ACCUMULATOR |
| Stock No. : | 10-724-SN | | Title : | AMMONIA SUCTION ACCUMULATOR | | Description : | AMMONIA SUCTION ACCUMULATOR, MFG BY BLIXT JOHNSON, VERTICAL DESIGN, NB#1104, S/N 1104, BUILT 1958, 150 PSI RATING AT 650°F, 36 " DIA X 10 " DEEP, OVERALL HEIGHT WITH LEGS IS 11 ½ ' , INCLUDES (2) 8 " VAPOR PORTS, (2) 6 " LOWER SIDE FLANGED AUXILIARY PORT, (2) 1 ¼ " LIQUID LEVEL FLOAT SWITCH FITTINGS, ¾ " AND 1 ½ " LOWER SIDE AUXILIARY PORTS, 1 ¼ " AND 2 " MIDDLE SIDE AUXILIARY PORTS, 1 ¼ " UPPER SIDE AUXILIARY PORT. | | Manufacturer : | BLIXT JOHNSON |
|
|
|
|
| AMMONIA SUCTION ACCUMULATOR |
| Stock No. : | 10-888-RO | | Title : | AMMONIA SUCTION ACCUMULATOR | | Description : | AMMONIA SUCTION ACCUMULATOR, MFG BY E.L. NICKEL, VERTICAL DESIGN WITH BOIL OUT COIL, NB#35157, S/N 37958, BUILT 1988, 150 PSI RATING AT - 20° TO 650°F, 56 " DIA X 116 " HIGH, (2) 4 " GAS PORTS, (2) 1 ¼ " COIL PORTS, (2) 3 " FLANGED PORTS ON BOTTOM. | | Manufacturer : | E.L. NICKEL |
|
|
|
|
| AMMONIA SUCTION ACCUMULATOR |
| Stock No. : | 10-889-RO | | Title : | AMMONIA SUCTION ACCUMULATOR | | Description : | AMMONIA SUCTION ACCUMULATOR, MFG BY E.L. NICKEL, VERTICAL DESIGN WITH BOIL OUT COIL, 48 " DIA X 120 " DEEP, APPROXIMATE OVERALL HEIGHT WITH LEGS IS 134 ", NB #35157, S/N 37958, BUILT 1988, 150 PSI MWP, 6 " AND 5 " GAS PORTS, (2) 1 ½ " COIL PORTS. | | Manufacturer : | E.L. NICKEL |
|
|
|
|
| AMMONIA VERTICAL SUCTION TRAP |
| Stock No. : | 10-763-SN | | Title : | AMMONIA VERTICAL SUCTION TRAP | | Description : | AMMONIA VERTICAL SUCTION TRAP FOR LIQUID TRANSFER SYSTEM, MFG BY VILTER, NB#31222, S/N E51318, BUILT 1983, 36 " DIAMETER X 7 ' HIGH, (2) 5 " GAS PORTS, 3 " PUMP SUCTION PORT, 1 " OIL DRAIN, FLANGED FLOAT COLUMN, 150 SPIG RATING AT -20°F TO 400°F, 10.6 PSI RATING AT -40°F. | | Manufacturer : | VILTER |
|
|
|
|
| AMMONIA SUCTION ACCUMULATOR |
| Stock No. : | 10-945-DF | | Title : | AMMONIA SUCTION ACCUMULATOR | | Description : | AMMONIA SUCTION ACCUMULATOR, MFG. BY HOWE, VERTICAL DESIGN, 36 " DIAMETER X 8 ' HIGH, 9 1/2 ' OVERALL HEIGHT, BUILT 1988, 150 PSI RATING, (2) 6 " VAPOR PORTS, NB#5546, S/N 6256. | | Manufacturer : | HOWE | | Size : | 36" DIA X 9 1/2' HIGH |
|
|
|
|
| CONDENSERS & RECEIVERS |
| Stock No. : | 10-946-DF | | Title : | CONDENSERS & RECEIVERS | | Description : | AMMONIA SUCTION ACCUMULATOR, MFG. BY RECO, VERTICAL DESIGN, 36 " DIAMETER X 8 ' HIGH, 11 ' OVERALL HEIGHT, BUILT 1980, 250 PSI RATING, (2) 6 " VAPOR PORTS, NB# 4124, S/N MS2055B. | | Manufacturer : | RECO | | Size : | 36" DIA X 8' HIGH |
|
|
|
|
| AMMONIA LIQUID RECIRCULATING SYSTEM |
| Stock No. : | 10-526-LE | | Title : | AMMONIA LIQUID RECIRCULATING SYSTEM | | Description : | AMMONIA LIQUID RECIRCULATION SYSTEM, MFG BY FRICK, NATIONAL BOARD #36443, RATED 150 PSI, BUILT 1971, FRAME MOUNTED TANK MEASURES 2 ' DIAMETER X 12 ' LONG WITH A 6 ' 6 " LEG, OVERALL HEIGHT APPROXIMATELY 10 ' 6 ", EQUIPPED WITH (2) 1 HP BELT DRIVE PUMPS, PUMPS ARE MFG BY WALTER EAGEN COMPANY, MODEL E-HL-924V, S/N ST29268, SYSTEM INCLUDES VALVES. | | Manufacturer : | FRICK | | Horse Power : | 1 |
|
|
|
|
| LIQUID AMMONIA PUMP |
| Stock No. : | 10-156-LF | | Title : | LIQUID AMMONIA PUMP | | Description : | LIQUID AMMONIA PUMP, MFG BY VIKING, MODEL KK924, POSITIVE DISPLACEMENT, 3 " INLET, 2 " OUTLET, 3 PHASE, 5 HP, 220/440 VOLTS, S/N 1398716. | | Manufacturer : | VIKING | | Model : | KK924 | | Horse Power : | 5 |
|
 |
|
|
| LIQUID AMMONIA PUMP |
| Stock No. : | 10-157-LF | | Title : | LIQUID AMMONIA PUMP | | Description : | LIQUID AMMONIA PUMP, MFG BY VIKING, MODEL KK924, POSITIVE DISPLACEMENT, 3 " INLET, 2 " OUTLET, 3 PHASE, 3 HP, 220/440 VOLTS, S/N 142. | | Manufacturer : | VIKING | | Model : | KK924 | | Horse Power : | 3 |
|
 |
|
|
|
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
